Oops! Page Not Found.
Sorry, the page you're looking for couldn't be found. It might have been removed, had its name changed, or is temporarily unavailable.
Back to Home
You Might Be Interested In
Pneumatic-Hydraulic Intensifier Cylinder | YTA63/50-5 | 3 Ton Output
Pneumatic-Hydraulic Intensifier Cylinder | YTA63/50-5 | 3 Ton Output Specification: Pneumatic-Hydraulic Intensifier Cylinder, YTA63/50-5, 3 Ton, Dual-Stage Air Drive (booster cylinder, air-over-oil intensifier) Two-stage pneumatic drive with P1/P2 air ports. P1 delivers rapid pre-compression stroke ...
Telescopic Hydraulic Cylinder with 125mm Bore 3100mm Stroke and 250 Bar Working Pressure for Heavy Duty Applications
Robot Arm Telescopic Cylinder with ISO 6022 compliance, 125/70-3100 specs, 250 Bar pressure, induction-hardened chrome rod, and double-acting cushioning. Features spherical plain bearings, intermediate guide rings, and interchangeable with Rexroth/Parker series. Custom configurations available.
CDH1 MF3 Mill Type Hydraulic Cylinder with ISO 6022 / DIN 24333 Standards, 180mm Bore and 140mm Rod, MF3 Head Rectangular Flange
CDH1 MF3 Mill Type Hydraulic Cylinder meets ISO 6022/DIN 24333 standards for 250 Bar heavy-duty service. Features MF3 head flange, 180/140mm bore/rod, induction hardened chrome rod, premium seals, and 100% Rexroth CDH1 interchangeability. Ideal for steel mills, forging presses, and heavy machinery.
100mm Bore Double-Acting Hydraulic Cylinder with Trunnion Mount for Heavy Duty Applications
CDH1 MT4 Mill-Type Cylinder, 100/70×1300mm, trunnion mount, double-acting. Barrel: 27SiMn seamless honed tube; rod: CK45/40Cr, hard chrome plated. Brass trunnion pins, spherical bearing rod end, adjustable cushioning. Tested at 35MPa hydrostatic, 25MPa cycling. Rexroth CDH1 MT4 compatible for articulated booms, swing arms, pivoting linkages.
