Oops! Page Not Found.
Sorry, the page you're looking for couldn't be found. It might have been removed, had its name changed, or is temporarily unavailable.
Back to Home
You Might Be Interested In
Guoyue Hydraulics Industrial Tie-Rod Hydraulic Cylinder — 150mm Bore × 100mm Rod × 125mm Stroke, 4-Tie-Rod Construction, Clevis Mount, Double-Acting, 21 MPa
Guoyue Hydraulics Industrial Tie-Rod Hydraulic Cylinder — 150mm Bore × 100mm Rod × 125mm Stroke, 4-Tie-Rod Construction, Clevis Mount, Double-Acting, 21 MPa Tie-rod series, 150mm bore, 100mm rod, 125mm stroke. Four tie rods with hex nuts holding the front and rear square caps together. This is the ...
CDH1 MT4 Mill Type Hydraulic Cylinder with 125mm Bore Diameter 250 Bar Pressure and MT4 Trunnion Mounting
CDH1 MT4 Mill Type Cylinder: ISO6022/DIN24333 certified heavy-duty hydraulic cylinder with 125mm bore, 70mm piston rod, and MT4 trunnion mounting. Handles 250 Bar pressure, 100% interchangeable with Rexroth CDH1. Ideal for steel mills, forging presses, and high-cycle industrial machinery.
Actuating Cylinder Double Rod Synchronous Cylinder with 110mm Bore 70mm Through Rod and 220mm Stroke
CGH1 MT4 110-70-220 double rod synchronous cylinder with 110mm bore, 70mm through rod, 220mm stroke. Trunnion mount allows free pivoting while maintaining equal 141.4 kN push-pull force at 250 Bar. Identical seal kits reduce spare parts by 50%. ISO 6022 standard, 100% factory tested.
Custom Heavy-duty Double Acting Hydraulic Cylinder ISO 6022 Standard Hydraulic Ram
Custom Heavy-duty CDL1 MF4 Hydraulic Cylinders engineered for high-frequency industrial cycles following ISO 6022 standards. Features 16MPa nominal pressure, double acting mill design, and premium imported seals. 100% Rexroth replaceable with reinforced mounting flanges for superior vibration resistance.
