iso 6022 hydraulic cylinder

Heavy Duty Trunnion Mount Hydraulic Cylinder CDH1 MT4 80mm Bore for Steel Mill Specification: Heavy Duty Mill Cylinder / CDH1 MT4 / ISO 6022 / Trunnion Mount / Industrial Hydraulic Standard Compliance: Manufactured strictly according to ISO 6022 / DIN 24333 standards. Designed for high-frequency, heavy-duty industrial cycles.Pressure Rating: Nominal working pressure 250 Bar (25 MPa); Maximum static test pressure 375 Bar.Dimensions: Bore 80mm / Rod 45mm / Stroke 450mm.Mounting

Rexroth Standard CDH1 MT4 63/45-70 Heavy Duty Double Acting Hydraulic Cylinder for Steel Mill & Casting Specification: Heavy Duty Mill Cylinder / CDH1 MT4 / ISO 6022 / Trunnion Mount / Protective Bellows (keywords) Manufactured in accordance with ISO 6022 and DIN 24333 heavy-duty industrial standards.Bore 63mm / Rod 45mm / Stroke 70mm.Rated working pressure 250 Bar (25 MPa); Maximum static test pressure 375 Bar.MT4 Intermediate Trunnion Mounting: Provides superior pivot

Kompakter Mühlenzylinder CDH1 MT4 50-36-225 mit 50-mm-Bohrung, 225-mm-Hub und Zapfenmontage für 15°-Drehung. Vollständig geschweißter Zapfen, spannungsarm geglüht und UT-geprüft. PTFE-Kolbenführung, 250 bar Druck, 49,1 kN Schubkraft. Leichte 18-kg-Konstruktion für Mühlenseitenführungen, Greiferspannung und Spulenwagenanwendungen.

CDH1 MP5 Mill Type Hydraulic Cylinder 160/90-1700 Heavy Duty ISO 3320 Standard 250Bar High Pressure Double Acting Hydraulic Ram Manufactured to ISO 6022 / DIN 24333 standards for 250 Bar extreme metallurgical environments.Equipped with MP5 spherical bearing eye at the cap end, providing self-alignment to eliminate lateral loading.Heavy-duty mill type construction with high-strength honed tubes for maximum structural durability.Piston rod features induction hardening and hard

CGKA Articulated Lifting Ring Head CDH1 Heavy-duty Hydraulic Cylinder Technical Specifications Standard: Main dimensions such as piston and piston rod diameter comply with DIN 24333 and ISO 6022 Rated pressure: 250 bar Static inspection pressure: Please inquire about working pressures higher than 375 bar The given work pressure is applicable to non-impact working conditions. In special loads, such as high working cycle numbers, it is necessary to perform strength checks on

Custom Heavy-duty CDL1 MF4 Hydraulic Cylinders for Large-scale Forging Presses Manufactured in strict accordance with ISO 6022 and DIN 24333 international standards to ensure 100% reliability in heavy-duty industrial environments. Available in a wide range of bore sizes and custom stroke lengths to meet specific engineering requirements for high-tonnage machinery. Our heavy duty round body cylinder design provides superior structural integrity compared to standard tie-rod

High Pressure CDH1 MT4 125/70-200 Mill Type Hydraulic Cylinder for Steel Mill 250 Bar Heavy Duty Hydraulic Ram Pivoting Versatility – The integrated intermediate trunnion (MT4) allows the cylinder to pivot during stroke, compensating for non-linear load paths. Pressure:Industrial Strength – Designed for a nominal 250 Bar, our CDH1 series thrives in high-frequency, high-shock metallurgical environments. Compatibility:Global Support – 100% interchangeable with Rexroth CDH1

CDH1 MP3 hydraulischer Mühlenzylinder in metallurgischer Qualität mit 80 mm Bohrung, 45 mm Stange und 230 mm Hub. Mit rollpoliertem Rohr, induktionsgehärtetem Stab, MP3-Gabelkopfsockel mit Auslaufschutzstift, 250 bar Betriebsdruck. Kompakte Länge im eingefahrenen Zustand von 480 mm, ISO 6022-Standard, 100 % werkseitig getestet mit individuellem QC-Bericht.

Hochleistungs-Hydraulikzylinder, hergestellt nach den Normen ISO 6022/DIN 24333. Verfügt über einen Arbeitsdruck von 250 Bar, eine Konstruktion aus hochfestem Stahl und erstklassige Dichtungen (NOK, Parker). Vollständig austauschbar mit Rexroth CDH1. Kundenspezifische Bohrungs-, Hub- und Stangendurchmesser verfügbar. CE, ISO9001 zertifiziert mit 1 Jahr Garantie.