iso 6022 hydraulic cylinder

Heavy Duty Trunnion Mount Hydraulic Cylinder CDH1 MT4 80mm Bore for Steel Mill Specification: Heavy Duty Mill Cylinder / CDH1 MT4 / ISO 6022 / Trunnion Mount / Industrial Hydraulic Standard Compliance: Manufactured strictly according to ISO 6022 / DIN 24333 standards. Designed for high-frequency, heavy-duty industrial cycles.Pressure Rating: Nominal working pressure 250 Bar (25 MPa); Maximum static test pressure 375 Bar.Dimensions: Bore 80mm / Rod 45mm / Stroke 450mm.Mounting

Rexroth Standard CDH1 MT4 63/45-70 Heavy Duty Double Acting Hydraulic Cylinder for Steel Mill & Casting Specification: Heavy Duty Mill Cylinder / CDH1 MT4 / ISO 6022 / Trunnion Mount / Protective Bellows (keywords) Manufactured in accordance with ISO 6022 and DIN 24333 heavy-duty industrial standards.Bore 63mm / Rod 45mm / Stroke 70mm.Rated working pressure 250 Bar (25 MPa); Maximum static test pressure 375 Bar.MT4 Intermediate Trunnion Mounting: Provides superior pivot

Cylindre de broyeur compact CDH1 MT4 50-36-225 avec alésage de 50 mm, course de 225 mm, support sur tourillon permettant un pivotement de 15°. Tourillon soudé à pénétration totale, soulagé et testé UT. Guide piston PTFE, pression 250 bars, force de poussée 49,1 kN. Conception légère de 18 kg pour les guides latéraux de broyeur, la tension des boucleurs et les applications de chariots à bobines.

CDH1 MP5 Mill Type Hydraulic Cylinder 160/90-1700 Heavy Duty ISO 3320 Standard 250Bar High Pressure Double Acting Hydraulic Ram Manufactured to ISO 6022 / DIN 24333 standards for 250 Bar extreme metallurgical environments.Equipped with MP5 spherical bearing eye at the cap end, providing self-alignment to eliminate lateral loading.Heavy-duty mill type construction with high-strength honed tubes for maximum structural durability.Piston rod features induction hardening and hard

CGKA Articulated Lifting Ring Head CDH1 Heavy-duty Hydraulic Cylinder Technical Specifications Standard: Main dimensions such as piston and piston rod diameter comply with DIN 24333 and ISO 6022 Rated pressure: 250 bar Static inspection pressure: Please inquire about working pressures higher than 375 bar The given work pressure is applicable to non-impact working conditions. In special loads, such as high working cycle numbers, it is necessary to perform strength checks on

Custom Heavy-duty CDL1 MF4 Hydraulic Cylinders for Large-scale Forging Presses Manufactured in strict accordance with ISO 6022 and DIN 24333 international standards to ensure 100% reliability in heavy-duty industrial environments. Available in a wide range of bore sizes and custom stroke lengths to meet specific engineering requirements for high-tonnage machinery. Our heavy duty round body cylinder design provides superior structural integrity compared to standard tie-rod

High Pressure CDH1 MT4 125/70-200 Mill Type Hydraulic Cylinder for Steel Mill 250 Bar Heavy Duty Hydraulic Ram Pivoting Versatility – The integrated intermediate trunnion (MT4) allows the cylinder to pivot during stroke, compensating for non-linear load paths. Pressure:Industrial Strength – Designed for a nominal 250 Bar, our CDH1 series thrives in high-frequency, high-shock metallurgical environments. Compatibility:Global Support – 100% interchangeable with Rexroth CDH1

Cylindre hydraulique de type broyeur de qualité métallurgique CDH1 MP3 avec alésage de 80 mm, tige de 45 mm, course de 230 mm. Comprend un tube bruni au rouleau, une tige trempée par induction, une base à chape MP3 avec goupille anti-débranchement, une pression de fonctionnement de 250 bars. Longueur rétractée compacte de 480 mm, norme ISO 6022, 100 % testé en usine avec rapport de contrôle qualité individuel.

Vérin hydraulique robuste fabriqué selon les normes ISO 6022/DIN 24333. Comprend une pression de service de 250 bars, une construction en acier à haute résistance et des joints haut de gamme (NOK, Parker). Entièrement interchangeable avec Rexroth CDH1. Diamètres d'alésage, de course et de tige personnalisés disponibles. Certifié CE, ISO9001 avec garantie 1 an.