mt4 trunnion cylinder

Heavy Duty Tie Rod Hydraulic Cylinder MT4 Intermediate Trunnion Mount 3000 PSI High Pressure Ram for Forging Press Specification:CDT3 MT1 Hydraulic Cylinder / 220mm Large Bore Clamping Actuator / ISO 6020-2 Head Trunnion Cylinder Manufactured in strict accordance with ISO 6020-2 / DIN 24554 heavy-duty tie-rod standards.Specialized 220/140-60 short-stroke configuration (220mm Bore / 140mm Rod / 60mm Stroke) designed to deliver immense clamping forces in confined spaces

Κύλινδρος τύπου μύλου CDH1 MT4, 100/70×1300 mm, βάση στήριξης, διπλής δράσης. Βαρέλι: 27SiMn χωρίς ραφή ακονισμένος σωλήνας. ράβδος: CK45/40Cr, σκληρή επιχρωμίωση. Ορειχάλκινοι πείροι κορμού, σφαιρικό άκρο ράβδου ρουλεμάν, ρυθμιζόμενη αντικραδασμική προστασία. Δοκιμασμένο σε 35MPa υδροστατική, κυκλική 25MPa. Rexroth CDH1 MT4 συμβατό για αρθρωτούς βραχίονες, περιστρεφόμενους βραχίονες, περιστρεφόμενους συνδέσμους.

Κύλινδρος τύπου μύλου CDH1 MT4, 100/70×1300mm, βάση στήριξης, διπλής δράσης. Κατασκευή βαρέως τύπου με κάννη 27SiMn, σκληρυμένη ράβδο χρωμίου και ορειχάλκινες ακίδες κορμού. Πρότυπο ISO 6022, πίεση λειτουργίας 25 MPa, εναλλάξιμα με Rexroth CDH1. Ιδανικό για αρθρωτούς βραχίονες και περιστρεφόμενους συνδέσμους στη μεταλλουργία και τον αυτοματισμό.

CDH1 MT4 κύλινδρος μύλου βαρέως τύπου, συμβατός με ISO 6022, πίεση εργασίας 250 Bar. Το στήριγμα Trunnion ελαχιστοποιεί την τριβή λόγω κακής ευθυγράμμισης. Η σκληρή επιχρωμιωμένη ράβδος, οι σφραγίδες υψηλής πίεσης εξασφαλίζουν ανθεκτικότητα. Πλήρως εναλλάξιμα με τις σειρές Rexroth, Parker, Eaton.

Product Description Specification: Heavy Duty Mill Cylinder / CDH1 MT4 / ISO 6022 / Trunnion Mount / Industrial Hydraulic CG series Hydraulic Cylinder , double acting mill cylinder , ISO 6022 hydraulic cylinder , heavy duty round body cylinder Standard Compliance: Manufactured strictly according to ISO 6022 / DIN 24333 standards. Designed for high-frequency, heavy-duty industrial cycles. Pressure Rating: Nominal working pressure 250 Bar (25 MPa); Maximum static test pressure

CDH2 MT4 MP5 Heavy Duty Hydraulic Cylinder CDH2 MP5/63/45/500A1X/B1CHDMWW Hydraulic Cylinder Feature Description Construction Tie-rod design for easy maintenance and seal replacement Operating Pressure Typically up to 210 bar (3,000 psi) Mounting Type (MT4) Commonly rear flange mount or mid-mount trunnion (exact type depends on manufacturer) Piston Rod End (MP5) Often external thread with lock nut, or spherical eye/ball joint for misalignment compensation Typical Applications

High Pressure CDH1 MT4 125/70-200 Mill Type Hydraulic Cylinder for Steel Mill 250 Bar Heavy Duty Hydraulic Ram Pivoting Versatility – The integrated intermediate trunnion (MT4) allows the cylinder to pivot during stroke, compensating for non-linear load paths. Pressure:Industrial Strength – Designed for a nominal 250 Bar, our CDH1 series thrives in high-frequency, high-shock metallurgical environments. Compatibility:Global Support – 100% interchangeable with Rexroth CDH1

Product Description Specification: CD Series Cylinder , Differential Mill Cylinder , Round Body Cylinder , Bolted Cylinder , Fast Speed Cylinder Manufactured in accordance with ISO 6022 and DIN 24333 heavy-duty mill standards. This unit features an 80mm bore with a 56mm high-tensile rod and a 340mm stroke. Rated working pressure is 250 Bar (25 MPa), designed for high-cycle fatigue resistance in steel mills and heavy machinery. MT4 Intermediate Trunnion Mounting: Equipped with

Trunnion Mount CDH1 MT4 50-36-225 Industrial Grade Chrome Plated Rod Double Acting Mill Type Metallurgical Hydraulic Cylinder for Rolling Mill Auxiliary Positioning Equipment Specification: CDH1 MT4, 50mm Bore, 36mm Rod, 225mm Stroke, Trunnion Mount, Compact Metallurgical Grade Mill Type Hydraulic Cylinder MT4 trunnion mount with hardened steel pivot pins on both sides, pin diameter 25mm case depth 1.5mm, allowing cylinder to swing through 15-degree arc during load movement